How to Set Up Your Water Filter Faucet System

Instructions

• STEP ONE

  Remove aerator

  Easy to install. No tools required. Remove aerator from faucet.

  

• STEP TWO

  Check for adapter needs

  Check threading to determine if an adapter is needed.
  
  Inside: Use an adapter.
  
  Outside: Likely no adapter needed.

  

• STEP THREE

  Optional: Install washer and adapter

  If needed, install washer and adapter. You may need to experiment with different pairings to see what works.

  

• STEP FOUR

  Mount the base system

  Screw base system to faucet. No tools required.

  

• STEP FIVE

  Attach filter

  Support the base and click filter into filter cup.

  

• STEP SIX

  Switch settings

  Turn to Brita® filtered water setting and flush with cold water for 5 minutes.

  

• STEP SEVEN

  Filter replacement indicator

  The Filter Replacement Indicator monitors the filter life and tells you when to replace the filter cartridge based on average water quality and filtered water usage by the average family. The Filter Replacement Indicator will signal the need for replacement after approximately 100 gallons/378 liters.
  
  Solid Green: No change needed.
  
  Green and Red: Filter has approximately 20 gallons of life left
  
  Solid Red: Time to change filter.

• STEP EIGHT

  1-click filter replacement

  Press the release button to pull out the filter. Insert the new filter into the base. Flush 5 minutes (tip: use this water to water your plants!)